Peace of Mind Systems Kamloops, Your Local Trusted Source for Security Products
Home Manuals Ademco Manuals Ademco Manuals
Ademco Manuals

DocumentsDate added

Order by : Name | Date | Hits [ Descendent ]
General InformationThis system offers you three forms of protection: burglary, fire, and emergency, depending on the configuration of your system. The system consists of a master keypad for controlling system operation, various wireless sensors that provide perimeter and interior burglary protection, and optional smoke or combustion detectors to provide early fire warning. In addition, optional wireless keypads may have been installed to allow you to control the system away from the master keypad. The system may also be controlled from a remote telephone and can be used as a speaker phone.The system uses microcomputer technology to monitor all protection zones and system status, display appropriate information on the keypad display, and initiate appropriate alarms. Your system may also have been programmed to automatically send alarm or status messages over the phone lines to a central alarm monitoring station, and may also be capable of two-way voice communication with the central station.
Congratulations on your ownership of a Honeywell Security System. You've made a wise decision in choosing it, for it represents the latest in security protection technology today. This system provides: Three forms of protection: burglary, fire* and emergency At least one keypad which provides control of system and displays system status Various sensors for perimeter and interior burglary protection Smoke or combustion detectors* designed to provide early warning in case of fire. Your system may also have been programmed to automatically send alarm or status messages over the phone lines to a Central Monitoring Station. * Commercial installations and some residential systems may not include fire protection – check with your installer.NOTE: Features and procedures described in this manual apply to the VISTA-20P/VISTA-20PSIA (VISTA-20P series) and VISTA-15P/VISTA-15PSIA (VISTA-15P series) security systems. Differences are noted where applicable.
Your Honeywell security system consists of a main control panel, at least one keypad, and various sensors strategically positioned throughout the premises. The system offers you three forms of protection: burglary, fire and emergency. The keypad provides full control of system operation. The system uses microcomputer technology to monitor all protection zones and system status and provides appropriate information for display on the keypad(s) used with the system, and initiates appropriate alarms. Yoursystem may also have been programmed to automatically transmit alarm or status messages over the phone lines to a central alarm monitoring station.
Nous tenons à vous féliciter pour l’acquisition de votre Système de Sécurité ADEMCO. En choisissant ce système, vous avez pris une sage décision puisqu’il représente la plus récente technologie offerte à ce jour en matière de protection etparce que des millions de résidences sont protégées par des systèmes ADEMCO. Ce système met à votre disposition : Trois type de protection : protection antivol, protection contre l’incendie* et protection en cas d’urgence. Au moins un clavier qui vous permet de contrôler les fonctions de votre système et, grâce à son afficheur, de connaître les états de ce dernier. Divers dispositifs destinés à la protection antivol du périmètre et de l’intérieur de votre demeure ou de votre commerce. Des détecteurs de fumée et/ou de combustion* conçus pour donner une alerte rapide en cas d’incendie. Votre système peut également avoir été programmé de façon à transmettre automatiquement, via une ligne téléphonique, les messages d’alarme ou de défectuosité à un poste de télésurveillance.*Certaines installations commerciales et résidentielles peuvent ne pas être dotées de la protection contre les incendies. Vérifiez auprès de votre installateur si cette option est disponible sur votre système.NOTE: Les caractéristiques et les procédures décrites dans le présent guide s’appliquent aux systèmes de sécurité de la série VISTA-20P/PS et de la série VISTA- 15P. Les différences, s’il y a lieu, sont indiquées.
Your Honeywell security system consists of a main control panel, at least one keypad, and various sensors strategically positioned throughout the premises. The system offers you three forms of protection: burglary, fire andemergency. The keypad provides full control of system operation. The system uses microcomputer technology to monitor all protection zones and system status and provides appropriate information for display on the keypad(s) used with the system, and initiates appropriate alarms. Yoursystem may also have been programmed to automatically transmit alarm or status messages over the phone lines to a central alarm monitoring station. This manual is designed to help you become comfortable operating your system. Each function is explained in step-by-step detail. We recommend you read the SYSTEM OVERVIEW section to become familiar with the terminology and the basic features of the system. NOTE: If you have a Symphony (Advanced User Interface) connected to your system, refer to the Symphony User Guide for operating instructions. NOTE: All references in this manual for number of zones, number of user codes, number of access cards, and the event log capacity, use the VISTA-250BP’s features. The following table lists the differences between the VISTA-128BP/128SIA and the VISTA-250BP control panels. Additionally, only the VISTA-128BP/128SIA supports thecapability to have a device duplicate keypad sounds at a remote location. All other features are identical for both panels.
Congratulations on your ownership of a Honeywell partitioned Security System. You've made a wise decision in choosing it, for it represents the latest in security protection technology today. Honeywell is the world's largest manufacturer of security systems and millions of premises are protected by Honeywell systems. This system offers you three forms of protection: burglary, fire and emergency. To realize the system's full potential, it is important that you feel comfortable in operating it. Your system consists of at least one Keypad which provides full control of system operation, various sensors which provide perimeter and interior burglary protection, plus a selected number of strategically placed smoke or combustion detectors designed to provide early warning in case of fire. The system uses microcomputer technology to monitor all protection zones and system status, display appropriate information on the keypad display, and initiate appropriate alarms. Your system may also have been programmed to automatically send alarm or status messages over the phone lines to a central alarm monitoring station, and may also be capable of two-way voice communication with the central station. NOTE: All references in this manual for number of zones, number of user codes, and the event log capacity, use the VISTA-250FBP’s features. All other features are identical for both panels.
Your Honeywell security system consists of a main control panel, at least one keypad, and various sensors strategically positioned throughout the premises. The system offers you three forms of protection: burglary, fire andemergency. The keypad provides full control of system operation. The system uses microcomputer technology to monitor all protection zones and system status and provides appropriate information for display on the keypad(s) used with the system, and initiates appropriate alarms. Your system may also have been programmed to automatically transmit alarm or status messages over the phone lines to a central alarm monitoring station. This manual is designed to help you become comfortable operating your system. Each function is explained in step-by-step detail. We recommend you read the SYSTEM OVERVIEW section to become familiar with the terminology and the basic features of the system. NOTE: All references in this manual for number of zones, user codes, partitions, VistaKey modules, the master partition and the event log capacity, use the VISTA-128FB’s features. All other features are identical for both panels.Also, all procedures in this guide for entering zone numbers or user numbers show 3-digit entries, which is valid for the VISTA-128FB. For the VISTA-32FB these entries are only 2-digits.
Congratulations on your ownership of a UL-approved ADEMCO VistaKey-SK Access Control Unit. The VistaKey-SK, interfaced to your security system, delivers a combination of access control capabilities with fire detection, intrusion detection, and hold-up systems. When connected to the control panel, the VistaKey-SK can operate the control panel and can provide access control to the protected premises. The VistaKey-SK: Helps to reduce unwanted alarms caused by improper keypad operation by simplifying operation through the use of a card-swipe reader or wireless fob. Aids in reducing operational costs by eliminating the need to re-key caused by employee turnover. Helps to improve security by controlling access of individuals to specific areas in the protected premises. Assists in streamlining security operations by monitoring and recording user activity at a single location. Helps to minimize security investments by integrating access control, intrusion detection, and early-warning fire detection. When the VistaKey-SK is interfaced to your security system,additional commands and operational capabilities are added to yoursystem. This guide describes these additional commands andoperational capabilities, and should be used with your existingsecurity system User Guide.